Fits 2wd versions of the electric Stampede and Rustler
each A-arm is 7 grams lighter than stock!
eliminates over 0.03” (0.8mm) of slop from the inner arm mount
RPM rear A-arms for the electric versions of the Traxxas Rustler and Stampede are stronger and more durable than stock versions, yet we've also managed to eliminate over 7 grams of weight per arm. That's 14 grams of unsprang weight eliminated with a single pair of rear RPM A-arms. Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce. We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we've adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030-Inch or 1/32-Inch of slop from the inner arm mount and more than 0.010-Inch or slightly less than 1/64-Inch of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.
RPM 80189 Traxxas Electric Stampeded 2WD and Electric Rustler - B010AWZRI2